Note: This metadata was prepared by the CRAWDAD team and verified by the data set (or tool) authors. We have made every effort to ensure its accuracy, but urge all users to consider the metadata and data carefully and be sure that their use in research is consistent with the nature and limitations of the data. We welcome any corrections.
This metadata was prepared based on the following reference(s):
|
version
| v. 2005-05-10 |
|
changes
| NAME CHANGED to tools/collect/802.11/wrapi_plus. Also see 'old name' field. |
|
bibtex
|
@MISC{tools-collect-802.11-wrapi_plus-2005-05-10,
author = {Feng Li and Mingzhe Li and Bob Kinicki and Mark Claypool},
title = {{CRAWDAD} tool tools/collect/802.11/wrapi_plus (v. 2005-05-10)},
howpublished = {Downloaded from http://crawdad.cs.dartmouth.edu/tools/collect/802.11/wrapi_plus},
month = may,
year = 2005
}
|
| metadata last modified | 2006-11-09 |
| summary | WRAPI+ is a tool to monitor wireless statistics, including received signal strength,
transmitted frame count, and failed frame transmissions and acknowledgments on a Windows XP
end hosts' IEEE 802.11b/g network device. WRAPI+ was built upon the freely available
WRAPI C++ library. |
|
old name
| wpi/perform/tool/wrapi_plus |
|
new name
| tools/collect/802.11/wrapi_plus |
| release date | 2005-05-10 |
|
web site
| http://perform.wpi.edu/tools/ |
|
wiki
|
go to the wiki page for this tool
|
| keyword | 802.11, RFMON, signal strength |
| authors | Feng Li
Mingzhe Li
Bob Kinicki
Mark Claypool
|
| output | MAC Layer Statistics (e.g., RSSI, TransmittedFragmentCout, RetryCount, etc) |
| parameters | Output file name |
| usage | 1)Before you run wrapi.exe, you need to stop "Wireless Zero Configuration Service".
by typing these two command at the command prompt
"net start ndisuio"
and "net stop WZCSVC"
2) wrapi.exe [filename]
It will generated two logfiles:
[filename]_log.dat: the Mac Layer Statistics Data.
[filename]_en.dat : Key the AP's Information. If there exist multiple APs.
It will recorder all the AP's Mac address. However, sometime it would
log a fake AP'MAC.
If no parameter is given, it will generate logfile names use the current date
for you such as "20041025153112.dat" and put it in the same directory. |
| algorithm | WRAPI+ is an application built upon the freely available C++ library named WRAPI10
that provides function calls to gather wireless statistics in Windows XP.
When run on an end-host, WRAPI+ periodically (every 500 ms, by default) reports and logs
IEEE 802.11 network interface statistics that includes received signal strength,
transmitted frame count, and failed frame transmissions and acknowledgments. WRAPI+ is
provided with source code to maximize reuse and enable measurement customization. |
| download url | Download (5.7 MB tar.gz) from US UK |
| limitation | 1) Only works with some chipsets, For example:
Net Gear WG511g v1 card.
Lucent ORiNOCO wireless cards,
Cisco Aironet cards (340 and 4800 series),
Compaq and Dell in-built wireless cards, (Dell could not get Fail Count)
Linksys cards. (not sure) |
